Pantron Automation, Inc. - Sensors and Controls for Automated Applications

ISG-A133 Infrared Photoelectric Amplifier

Manufacturer: Pantron Instruments, GmbH
Category: Infrared Photoelectric Amplifiers

Automatic amplifiers are the further development of standard amplifiers. They work without adjustment and operate by switching on the power supply to the correct range, adjusting the transmit power to an optimum, and by constantly regulating the effects of disturbances. The amplifier works with modulated infrared light, which enables a high degree of light immunity to ambient light.

Features and Specifications

Detection range up to 50 m (164 ft)
Transistor output npn / pnp
Adjustment aid via test function
Test input for transmitter switch-OFF
Alarm output for indication of functional reserve
Adjustable switch-ON and switch-OFF delay
2 different switchable transmit frequencies
4 different selectable basic transmit levels
Switching mode light / dark selectable

Downloads and Info

Accessories

Sensing range (Through-beam configuration)
Range (using transmitter ITL combined with receiver IRL / IRH)	7 m / 15 m (23 ft / 49 ft)
Range (using transmitter ITH combined with receiver IRL / IRH)	10 m / 25 m (33 ft / 82 ft)
Range (using transmitter ITA combined with receiver IRL / IRH)	20 m / 50 m (66 ft / 164 ft)

Technical Data	at +68 °F
Supply voltage	see "Available Types"
Operating basis	modulated IR light
Transmit power	automatic adjustment
Transmit frequency	3.7 kHz / 4.1 kHz, switchable
Switching function	light / dark, switchable
Basic transmit level	low1 / low2 / high1 / high2
Switching delay	0 ... 10 seconds
Transistor output	npn / pnp, max. 30 VDC
Max. load	100 mA
Switching frequency	20 Hz (low) / 11 Hz (high)
Alarm output	pnp, 24 V DC
Max. load	AC: 5 mA, DC: 100 mA
Test input	0 ... 30 V DC
Housing material	plastic
Protection class	IP 40
Operation temperature	-13 °F ... +140 °F